Medical connectors
Plates of small connectors printed in a single run, then washed, cured, and inspected by hand.
SLA · Stereolithography
Our SLA layers are thinner:
25 microns.
What It Is
Welcome to our smoothest process.
SLA prints by curing liquid resin with light, one ultra-fine layer at a time, which gives your part the smoothest surface and the sharpest detail. It is ideal for small, high-detail production parts, molds, and parts that have to look perfect. Every part is washed, cured, and finished by hand before it ships.
Technical SpecificationsSLA
Part size
210mm
Up to 200 × 125 × 210 mm
Detail
25micron layers
Layers thinner than a human hair
50-micron XY resolution
Finish
Ultra-smooth and ready to paint
Applications
- High-detail production parts
- Detailed prototypes
- Molds & tooling
- Display models
- Clear parts
- Small intricate parts
Every SLA part, made your way.
Finest Detail, Smoothest Surface
Layers thinner than a human hair, with a finish that needs almost no work:
- Tiny features & text: micro details and legible lettering, held crisp and clean.
- Thin walls & fine lattices: open, fine-walled structures that stay true.
- Glassy, paint-ready surface: layer lines you have to look hard to find, ready to prime and paint.
Clear & Color
Parts you can see through, or printed in the color you need:
- Clear parts & molds: see-through housings, lenses, and molds that show the cavity as you cast.
- Printed in color: black, white, grey, or clear resin, with no paint needed.
- Painted any color: matched to your spec, sprayed to a flawless finish.
Build In Your Branding
Your identity, printed into the part:
- Logos & fine text: raised or recessed, down to the finest edge and smallest number.
- Branded products: merch, packaging, and demo pieces with your brand built in.
- Surface patterns: textures worked into the surface itself.
Example Projects
Medical & dental models
Patient-specific reconstruction models, instrument trays, and dental arches, with fine anatomy held crisp.
Footwear prototypes
Lattice insoles and perforated uppers, printed with fine, consistent open structures.
Razor-sharp detail
Fine features and text, held crisp and clean.
Shown: clear threaded lab tubes, still on their supports
01 · Washed as a batch
Many parts, one run
Fill the plate and print a whole batch in a single run.
Shown: black container lids, one production batch
Look closer.
Advantage
Why SLA changes the game.
01
Finest Detail
The sharpest features and smallest text we print.
02
Smoothest Surface
A glassy finish with minimal finishing needed.
03
Clear & Transparent
Clear resin parts that let light and the inside show through.
04
Molds & Tooling
Smooth, accurate printed molds for short molding runs.
05
Full Resin Range
General, tough, rigid, clear, flexible, high-temp and flame-retardant resins.
MADE WITH
Material: Resin
11 resins, service printing
SLA prints in liquid resin, cured by light. We run 11 resins, from our fine-detail General Resin to tough, rigid, clear, flexible, high-temp, and flame-retardant grades, so the material matches the job.
Prototypes & modelsFine-detail partsColor matched
01General & Custom Color
Our sharpest detail and smoothest finish, in black, grey, white, or a custom color matched to your brand.
Light pipesFluidicsSee-through housings
02Clear
Polishes to near glass-like clarity.
Snap-fit housingsClips & hingesImpact resistant
03Tough 2000 · 1500 · 1000
From stiff, ABS-like parts to resilient clips that bend and spring back, and parts that take repeated drops.
Molds & jigsStiffest resinHeat resistant
04Rigid 10K & High Temp
Glass-filled Rigid 10K for stiff molds and fixtures, and High Temp for hot-air and fluid parts (about 238 °C at 0.45 MPa).
Electronics enclosuresInterior partsSelf-extinguishing
05Flame Retardant
A flame-retardant, self-extinguishing resin for enclosures and interior components.
Grips & sealsCushioningSoft prototypes
06Flexible 80A & 50A
Rubber-like resins, from shoe-sole firm (80A) to very soft and stretchy (50A).
Ready to start?