Printerior Launches Full Range of LFAM Pellet Grades, Adding Domestic Supply for U.S. Manufacturers
Built from years of printing client parts in-house, Printerior's recycled pellet grades are formulated, optimized and tested for LFAM, giving U.S. manufacturers a domestic source of feedstock they can scale on.
Published November 17, 2026

CHESTERFIELD, Mo., Nov. 17, 2026: U.S. manufacturers using large-format additive manufacturing (LFAM) have a new domestic source of recycled feedstock that is already proven at production scale. Printerior is launching a full range of LFAM pellet grades it developed, tested and continuously used on its own large-format printers for its 3D printing services:
- 9 grades in stock and ready to ship
- More than 15 grades formulated and ready for production on order
- More than 35 combinations compounded on request
The launch addresses two core needs for LFAM users: pellet grades optimized for large-format printing, and a supply chain they can rely on. Each grade is tuned for melt flow, bead stability and low shrinkage, so large parts print fast, hold their shape and stay true to size, with the same, consistent results from lot to lot. With U.S.-based production of up to 1 million pounds of material a year and stocked grades, U.S. manufacturers can scale from a trial box to a truckload of the same grade close to home, with no overseas shipping or wait on a custom run.
“More manufacturers are turning to LFAM for tooling, molds and large production parts, and they need specialized material made for the process and a supplier they can count on. Bringing our full range of pellet grades to market gives U.S. manufacturers both, straight from stock.”
Optimized for large-format printing
Successful LFAM printing depends on three key material properties, one for each stage of a print: how the material flows through the extruder, how each bead holds shape once it is laid, and how much the part shrinks as it cools. Printerior's formulas are tuned to the optimal range on all three:
- Consistent melt flow. The pellets melt evenly and flow at the high output rates large-format extruders run, so the extruder lays a steady, even bead at full production speed.
- Stable beads. Each bead holds its width and height once it is laid and carries the weight of every layer above it without sagging, so tall walls stay plumb and overhangs hold their designed angle.
- Low shrinkage. The part shrinks very little as it cools, so it does not warp or lift off the bed, and the part ends at the desired print size. Printerior prints single parts up to 40 feet long without them lifting.
Together, these qualities give high dimensional stability at efficient print speeds. The pellet grades also deliver excellent layer-to-layer adhesion, the bond large printed parts depend on, with tensile strength and elongation tuned for rugged parts. Every lot is tested for melt flow and strength and traced from raw material to finished pellet, so the material prints the same from one order to the next.
“A 40-foot-long part only comes off the printer flat and true to shape if the material is engineered for it. We fine-tuned our formulas on our own large-format printers to make that possible.”
Proven on a production floor
Printerior, one of the nation's largest recycled polymer manufacturers of PETG and PLA, has compounded its own filament and pellets since 2021, formulating and refining grades over thousands of client projects it has printed and compounding custom materials for other manufacturers. This launch turns that work into a full range of production-ready LFAM pellet grades, proven on Printerior's own printers and now in stock or ready to produce on order for U.S. manufacturers. This year alone, more than 250,000 lb of Printerior material has gone into finished parts through its printing services.
Examples of LFAM projects printed on its own material this year include two 25-foot feature walls for KI, a structural RV interior part in glass-filled polypropylene, and modular hospital headwall frames for Nexxspan.
U.S. plastic waste, back into U.S. production
Printerior reclaims post-consumer and post-industrial plastic, including food packaging, cosmetic waste and manufacturing scrap, then cleans and compounds it into production-grade pellets made from up to 100% recycled U.S. plastic waste. The pellets feed LFAM printers directly. Printed parts can stay in that loop. Through Printerior's end-of-life service, customers send parts back at the end of life, and Printerior shreds them into new material, keeping over 85,000 lb of plastic out of landfill so far.
A reliable supply, in stock now
Printerior compounds every grade in-house in Chesterfield, Missouri, from raw material to finished pellet, and keeps its standard grades in stock, so supply doesn't depend on an outside compounder or a custom run. Virgin versions of every grade are also available.
- Stocked pellet grades: rPETG, rPETG UV Stabilized, rPLA, rPETG 20% Glass Fiber UL 94 V-0, rPETG 20% and 30% Glass Fiber, rPETG Wood + Glass Fiber, rPP 30% Glass Fiber and rPP Wood + Glass Fiber.
- Order sizes: a 25 kg trial box, a gaylord, or a bulk truckload.
- Samples: sample jars of any stocked grade, and a 25 kg trial box before committing to a gaylord.
Made to spec, beyond stock
Because Printerior compounds in-house, buyers who need more than the stocked grades can order custom pellets compounded to their spec. Buyers pick a base resin, such as rPETG, rPLA, rPP, rPA6, rPA12, rPC, rABS, rASA or rTPU, and an additive, such as glass fiber, carbon fiber, halogen-free UL 94 V-0 flame retardant, UV stabilizer, antimicrobial, wood fiber, conductive or electrostatic dissipative (ESD), and Printerior compounds them into pellets to their spec. Base resins and additives beyond these lists are also available, and colors can be matched to RAL or Pantone.
Custom grades Printerior has already compounded and printed include a flame-retardant recycled PETG rated UL 94 V-0 on printed parts, not molded bars; an exotic fiber-filled polymer for the defense industry; and outdoor-grade glass-filled ASA, plus carbon-fiber PC and ABS tooling grades. Beyond the standard grades, Printerior compounds material to any spec.
Request samples:LFAM users can request sample jars or a 25 kg trial box through the Printerior website at printeriordesigns.com/contact or by emailing info@printeriordesigns.com.
About Printerior
Printerior is a pioneering, vertically integrated additive manufacturing company specializing in large-scale, sustainable 3D printing solutions. Based in Chesterfield, Missouri, Printerior offers 3D printing services, material manufacturing and LFAM systems sales, plus design services, mass production printing, and recycling, all under one roof. It runs 375+ printers across FDM, SLS, SLA and LFAM. Learn more at printeriordesigns.com.
Media contact
Annabel Thorpe
Marketing Director, Printerior



